Repair Patch Reinforcement – Self-Adhesive Patches for Flat Fabrics Repair Patch Reinforcement are self-adhesive repair patches designed for flat fabrics. These patches allow you to quickly and easily fix small holes or tears in your garments. Repair Patch Reinforcement is especially suitable for fabrics used in reinforcement areas on Pointer 3.0 and Pointer Pro, as well as jackets and pants from the Endeavor, Noux, and Rough series. Instructions: Ensure the area to be repaired is clean and dry. Cut the patch so it is slightly larger than the hole/tear you want to cover. Round the corners of the patch and remove the protective film. Apply with an iron at a temperature of 110-120 degrees Celsius, placing a piece of fabric between the patch and the iron. Do not use steam. Press lightly for 30-60 seconds. Allow the patch to cool with a weight on top.